Top 5 Kitchen Design Mistakes to Avoid
Remodeling your kitchen is not a small project. A lot of loose ends have to come together, to avoid unexpected costs or delays. I think the best way to prevent a mistake is to know what mistakes are most commonly made. Here are my top 5 design mistakes to watch for and avoid.
1. Whoops! I Forgot to
Double-Check All My Measurements.
Always measure twice ... design once! When it comes to kitchen design, every inch counts. In fact, every 1/16" of an inch counts.
Inaccurate measurements are one of the most common design mistakes. If you don't double check your measurements, it's possible that your cabinets, countertops, appliances or even the sink will not fit when you're ready to install!
Designing a kitchen is like putting together a big jigsaw puzzle with different shapes and sizes that must fit together perfectly in order to complete the picture. Inaccurate measurements can cause delays to the project, unforeseen expenses as well as a lot of additional stress in your household.
2. Ignoring Standard Clearance Recommendations & Requirements
Continuing on the subject of measurements ... take note of the different items in your design that need space to function and ensure that there are proper clearances within the kitchen. For a kitchen to be functional, allow ample space for cabinet and appliance doors to open fully without hitting each other or any obstacles.
In addition, it's also important to pay attention to potential collisions with items that are placed at a 90-degree angle to one another. In the example below, the designer allowed additional space between the cabinet and the corner to allow for the drawer to open fully without interfering with the handle of the dishwasher, which was placed on the adjacent wall.
3. Not Paying Attention to Architecture and Structural Elements.
Always make sure to plan and design around the architectural details of your space. The architectural details consist of windows, doors and trim as well as any additional details such as ceiling beams or crown molding.
When designing around doors and windows, it's important to remember to leave space between the cabinetry and any door/window trim (or casing). At least 3" of space between the cabinets and any trimwork is ideal although this can vary depending on your space. This allows room for the wall to be painted or tiled depending on your design. Your Dura Supreme kitchen designer can work with you to determine the appropriate amount of space for your project.
Another common mistake is forgetting to leave room for the crown molding to be installed on top of the cabinets. Not planning for the crown molding installation makes the molding look like an afterthought as illustrated in the example below.
4. Created a Kitchen Island that Doesn't Fit or Function with the Kitchen Design
The idea of installing a kitchen island offers the promise of additional storage and countertop space, but ... choosing the wrong kitchen island and/or placing it in the wrong spot can be a disaster. Remember that the kitchen is a work area and anything that gets in the way of your working efficiently is going to be a problem and cause headaches down the road.
Let's take a closer look at the example below; here we have an unusual shaped kitchen island that is just too big for the space. And that's not all, the space between the range and the sink (hidden behind the kitchen island) is also too small making this kitchen feel cramped and difficult to work in.
The kitchen island should be large enough to be functional but not take over the space. Kitchen islands that are too narrow or too small will also have an impact on the overall functionality of the kitchen layouts.
5. Where did the Counter Space Go? I Forgot to Account for My Small Appliance Storage.
One of the biggest complaints homeowners have about their kitchens is the lack of countertop space. The countertops, just like the cabinetry need to be functional within a kitchen. The amount of space and where you need the space should be specificified based on how you plan to use your kitchen.
The most common countertop space mistake is having an over abundance of appliances. We all have and/or want lots of fun gadgets in our new kitchen, but it's important to consider what you lose when you add more. For example, remember that a separate cooktop with a seprate oven will take up more space than one free-standing or slide-in-range.
Not to mention all the small countertop appliances that we have today ... toasters, coffee makers, can openers, mixers, food processors, etc. When designing a new kitchen it's important to consider where these small appliances will be stored and used to better control appliance creep, which is the tendency for appliances to accumulate on our countertops, taking up this precious workspace. Adding storage solutions near your workspace can help keep them from taking over your counterspace.
Understanding these classic design mistakes will help you know how to overcome and avoid them in your kitchen renovation.
Authored by Mandi Juskiewicz on July 25, 2016 - 7:30am